DP SCANNER
Use the DP Scanner to scan barcodes with the Computer Caliper
THE DP SCANNER
Use the DP Scanner to scan barcodes with the
DP II Computer Caliper or Digitech® Professional caliper.
Together with an adapted software application, the DP Scanner becomes fully integrated with your caliper.
Reliable performance
The DP Scanner offers reliable performance in various light conditions and has sturdy construction to resist mechanic shocks. A 50 degree scan angle enables high capacity reading of barcodes also where space and reach is limited.
Log Scaling
With the DP Scanner module on your DP caliper and software you can scan and automatically read barcodes, either on paper or LCD screens such as mobile phone, tablet and PC monitor. Short wavelength red LED illumination enhances visibility when aiming and a built-in decoder enables the scan engine to decode barcodes after scanning and output the information via a serial communication interface.
Size | 57x30x30mm, 2.28”x1.2”x1.2”. |
Weight | 25g, 1oz. |
Communication | Serial RS-232C 9600bps, 8 bit, 1 stop bit |
Water protected | IP67 |
Buzzer | YES |
Power | Powered by DP/DPII. Voltage 3.3V |
Current consumption | Max. 120mA |
Barcode scanner | Light source:1 red LED (Peak wavelength 624 nm) |
Optics |
|
Depth of field |
|
Supported Symbologies |
|
Industrial | 2of5, Interleaved 2of5, ISBN-ISSM-ISSN, Matrix 2of5, MSI/ Plessey, S-Code,Telepen, Tri-Optic, UK/Plessey Postal code: Chinese Post, Korean Postal Authority Code |
Durability |
|
Drop test | packed in dummy case 1.8 m / 6 ft drop onto concrete surface |
Regulatory & Safety | RoHS, IEC62471 |